PAPI lights, and the older VASI lights, are visual glide slope indicators: light units beside the runway that show white or red depending on whether you are above, on or below the approach path. On a standard four-light PAPI, two white and two red lights mean you are on the glide path, normally 3 degrees; more white means you are high and more red means you are low. On a two-bar VASI, red over white means you are on the glide path.
Part of our Airport Operations guide. For the rest of the lights you will see on a night approach, read our guide to airport lighting.
What PAPI and VASI lights do
Visual glide slope indicators give you vertical guidance on final, day or night. The Pilot’s Handbook of Aeronautical Knowledge (PHAK) explains that if you hold the glide path they show, you should have adequate obstacle clearance and touch down within a specified portion of the runway. Each light unit projects a beam that is white in its upper part and red in its lower part, so the color you see depends on your angle above the light. Three rules from the Aeronautical Information Manual (AIM 2-1-2) apply to every system:
- Vertical guidance only. Left and right guidance comes from the runway or the runway lights.
- Line up first. Do not start a descent using the lights until you are visually aligned with the runway.
- The protection has limits. Obstacle clearance applies only within a defined area around the extended centerline.
How to read a PAPI
A precision approach path indicator (PAPI) is a single row of two or four light units, normally on the left side of the runway, visible from about 5 miles by day and up to 20 miles at night. A four-light PAPI shows you one of five pictures:
- Four white: high, more than 3.5 degrees.
- Three white, one red: slightly high, about 3.2 degrees.
- Two white, two red: on the glide path, 3 degrees.
- One white, three red: slightly low, about 2.8 degrees.
- Four red: low, less than 2.5 degrees.
Each unit is aimed at a slightly different angle. Under the FAA’s installation standard (Advisory Circular 150/5340-30J), the unit nearest the runway is aimed highest, so as you descend, red appears from the runway side outward. The exact angle at which each light changes varies slightly between installations, so fly the color picture rather than a number. On a two-light PAPI the inboard unit is aimed above the glide path and the outboard unit below it: one red and one white means on path, two white high, two red low.
How to read a VASI
A visual approach slope indicator (VASI) uses bars of 2, 4, 6, 12 or 16 light units. Installations of 2, 4 or 6 units sit on one side of the runway, usually the left; 12 and 16 unit installations use both sides. VASI lights are visible from 3 to 5 miles by day and up to 20 miles or more at night.
Most VASIs have two bars, near and far, and give one glide path, normally 3 degrees:
- Red over white (far bar red, near bar white): on the glide path.
- White over white: above the glide path.
- Red over red: below the glide path.
The FAA’s Airplane Flying Handbook offers the memory aid “red over white, you’re all right.”

A three-bar VASI adds a middle bar and two glide paths. The lower path, from the near and middle bars, is normally 3 degrees. The upper path, from the middle and far bars, is normally a quarter degree higher and is meant only for high-cockpit aircraft. In a training airplane, fly the lower path: near bar white, middle and far bars red.
The AIM notes that some VASIs are set as high as 4.5 degrees for obstacle clearance, and that angles above 3.5 degrees may increase the runway length high performance aircraft need for landing and rollout.
Obstacle clearance: what the lights protect
| System | Safe obstruction clearance (AIM 2-1-2) | Visible by day / at night |
|---|---|---|
| VASI | Within 10 degrees either side of the extended runway centerline, out to 4 NM from the threshold | 3 to 5 miles / 20 miles or more |
| PAPI | Typically within 10 degrees either side of the extended runway centerline, out to 3.4 NM from the threshold | About 5 miles / up to 20 miles |
At some runways that area is smaller, or the system is offset from the centerline, and the limits are published in the Chart Supplement and NOTAMs. One current Chart Supplement remark, for example, marks a PAPI unusable beyond 3.5 miles on final because of large towers on the extended centerline. Outside the protected area, an on-path picture promises nothing about terrain or towers.
Night is where these lights earn their keep. The Airplane Flying Handbook warns that a black-hole approach over water or unlit terrain can make the runway seem out of position and lead to landing short, and it tells pilots to use a VASI or PAPI whenever one is available.
The rule: 14 CFR 91.129(e)(3)
For Class D airspace, 14 CFR 91.129(e)(3) says each pilot operating an airplane approaching to land on a runway served by a visual approach slope indicator must maintain an altitude at or above the glide path until a lower altitude is necessary for a safe landing. Paragraph (e)(4) allows normal bracketing above or below the glide path to stay on it.
- It applies to every airplane, not just large or turbine-powered ones.
- It reaches Class C and Class B, because 91.130(a) and 91.131(a) require compliance with 91.129.
- Airports in Class E and G airspace fall under 91.127 and 91.126, which have no equivalent rule, but the obstacle clearance logic is the same.
For a refresher on which airports sit in which class, see airspace classes.
Other glide slope systems you may see
| System | On glide path | Above | Below | Useful range |
|---|---|---|---|---|
| Tri-color | Green | Amber | Red | About 1/2 to 1 mile by day, up to 5 miles at night |
| Pulsating | Steady white, or alternating red and white | Pulsating white | Steady red when slightly below, pulsating red further below | About 4 miles by day, up to 10 miles at night |
| Alignment of elements | Panels line up | Center panel appears above the outer panels | Center panel appears below the outer panels | About 3/4 mile |
Tri-color and pulsating indicators each use a single light unit, so the AIM cautions that they could be confused with other lights. On a tri-color system you may see dark amber as you descend from green to red; the PHAK warns not to mistake it for an above-glide-path signal. On a pulsating system, the pulse rate increases the further you get from the glide path. Alignment-of-elements systems are painted panels, normally black and white or fluorescent orange, found at some small airports.
Find your airport’s system in the Chart Supplement
The Chart Supplement lists the glide slope indicator for each runway end. A typical entry shows the system and a position code, such as PAPI(P4L), then the glide angle (for example GA 3.0°) and the threshold crossing height (TCH) in feet. In the legend, P2L or P4L means a PAPI with 2 or 4 identical light units on the left side (P2R and P4R on the right), and V2L, V4L, V6L, V12 and V16 are VASIs with that many boxes. Not every runway uses 3 degrees: 3.5 degree PAPIs appear in the current supplement, and both the AIM and the FAA siting standard allow steeper angles where obstacles require them. The remarks can also restrict a system or list it among the lights you turn on with your microphone, a procedure covered in our airport lighting guide.
Flying a PAPI approach, step by step
- Before the flight, check the Chart Supplement and NOTAMs for the runway’s system, angle and restrictions.
- On final, get aligned with the runway before you use the lights for descent.
- Hold the on-path picture, two white and two red, with small, early pitch and power corrections as soon as a light changes color.
- If you see all red, you are below the glide path and its obstacle clearance is no longer assured. Stop the descent until you are back on the path, or go around.
- Close to the runway, shift to your aiming point and flare normally. The rule lets you go below the glide path when a lower altitude is necessary for a safe landing.
Our guide to how to land an airplane covers the stabilized approach and aiming point. At a towered field, the tower can also clear you to land with a steady green light if your radio fails; see light gun signals and lost communications, along with towered airport communications for the normal radio work. The painted side of the runway is covered in runway markings and airport signs.
- 4 white: high (more than 3.5°)
- 3 white, 1 red: slightly high (about 3.2°)
- 2 white, 2 red: on glide path (3°)
- 1 white, 3 red: slightly low (about 2.8°)
- 4 red: low (less than 2.5°)
- 2-bar VASI: red over white on path; white over white high; red over red low
- Protected area (typical): 10° either side of centerline, to 3.4 NM (PAPI) or 4 NM (VASI)
Gear for visual approaches
What you'll need
The references behind this guide and the cockpit gear for flying approaches day and night, all from PilotMall.com.
Frequently asked questions
What does two red and two white mean on a PAPI?
It means you are on the glide path, which is normally 3 degrees. Four white means you are high, three white and one red slightly high, one white and three red slightly low, and four red low.
What is the difference between a PAPI and a VASI?
Both use light units that show white above a set angle and red below it. A PAPI is a single row of two or four lights, normally on the left side of the runway. A VASI uses two or three bars of lights, near, middle and far, and shows red over white when you are on the glide path.
Is it legal to fly below the VASI or PAPI glide path?
In Class D airspace, and in Class C and Class B through 14 CFR 91.130 and 91.131, 14 CFR 91.129(e)(3) requires an airplane approaching a runway served by a visual approach slope indicator to stay at or above the glide path until a lower altitude is necessary for a safe landing. Normal bracketing to stay on the glide path is allowed.
How far out does a PAPI provide obstacle clearance?
The AIM says a PAPI typically provides safe obstruction clearance within 10 degrees of the extended runway centerline out to 3.4 NM from the threshold, and a VASI out to 4 NM. Some installations have reduced coverage, which is published in the Chart Supplement and NOTAMs.
What does “red over white, you’re all right” mean?
It is the Airplane Flying Handbook memory aid for a two-bar VASI. When the far bar is red and the near bar is white, you are on the glide path. White over white means you are too high, and red over red means you are too low.
Can I turn on a PAPI myself?
At some airports the PAPI or VASI is part of the pilot-controlled lighting system and comes on when you key your microphone on the listed frequency. The Chart Supplement entry for the airport says which lights you can activate and on which frequency.



